Stainless steel food and beverage disperser

Stainless Steel FoodBeverageDisperser

Product Introduction:

The stainless steel food and beverage disperseris specially designed for pilot tests, simulated production and small-batch factory production, with a maximum processing capacity of 50L. The standard working head adopts a claw-type structure, and suitable stators and rotors can be freely replaced according to different materials and process requirements.

Product Functions:

Homogenization/Emulsification/Depolymerization/Dispersion/Fat Emulsion/Pesticide/Yogurt/Textile Auxiliaries/Suspension/Juice/Cell Disruption/Oil-Water Emulsification/Coal Slurry/Cosmetics/Asphalt/Pigment/Flavor

Technical Parameters:

Model: Y90

Power: 1500W

Power Supply: 220V 50Hz/60Hz

Speed Range: 300~3600rpm (Variable Frequency Speed Regulation)

Processing Capacity: 2000ml - 50000ml (H₂O)

Speed Display Method: Digital Display

Standard Working Head Configuration: 90G

Optional Working Heads:

Material in Contact with Materials: 304

Material of Shaft Sleeve in Liquid-Immersed Part: PTFE

Work Stand: Electric Lifting

Packaging: Wooden Case

Total Weight: 50kg

Packaging Size: Confirm at the time of order

Accessories: Working Head Disassembly Tool

Spare Parts Package Content: Shaft Sleeve

Optional Accessories: Reactor-Mounted Installation Flange

Product Advantages:

1. Specially designed for pilot tests, with a processing capacity of 1L - 50L (H₂O)

2. Only by replacing the working head, the equipment can realize the functions of Eumix (Stirring), Hishear (Dispersion, Homogenization, Emulsification), Jetmixers (Jet Mixing) and PLM (Solid-Liquid Dispersion Mixing).

3. The equipment is equipped with a high-speed variable frequency motor, which starts with variable frequency to protect the equipment, and the speed is adjustable and displayable.

4. Continuous working time can reach up to 8 hours

5. The dispersion head adopts a quick connection method, which is convenient for disassembly and replacement.

6. The equipment adopts a modular design and can be flexibly combined.

Application Cases:

1. Complete O/W emulsification with Hishear working head

Put the aqueous phase into the container, adjust the speed to 6000rpm, then slowly add the oil phase, and run for 10 minutes to complete the emulsification.

2. Complete xanthan gum dissolution with Jetmixers working head

Add xanthan gum into water, adjust the speed to 4500rpm, and run for 15 minutes to complete the dissolution.

3. Complete pigment dispersion with Eumix toothed disc working head

Add pigment into resin, adjust the speed to 3000rpm, and run for 15 minutes to complete the dispersion.

Note:

1. The upper limit of batch processing capacity in the table is measured with water as the medium

2. The batch processing capacity depends on the viscosity and solid content of the material. If you encounter difficulties in model selection, please contact Yuedi Company by phone.

3. For special requirements such as high temperature, flammability, explosiveness and corrosion, please confirm and customize in writing to avoid danger and loss.

4. The data in this table may be inconsistent due to technical improvements or customization, please refer to the actual product.